Cygnus Mini ROV Mountable
*Price may change due to echange rate.
The Cygnus Mini ROV Mountable thickness gauge has been specially designed to be mounted onto small observation ROVs with or without a manipulator facility. Built in conjunction with VideoRay, this mountable subsea thickness gauge will allow the operator to carry out an ultrasonic thickness measurement in areas that have previously been infeasible using larger ROVs or divers. The multiple echo thickness gauge measures metal thickness and corrosion without removing protective coatings.
Dedicated software displays the time, date and thickness readings on the surface which can all be stored or logged. Alternatively, an optional Topside Repeater (TSR) is available which has the facility to display the thickness measurements remotely and overlay them on to a video signal. This allows the measurements to be superimposed on the ROV camera’s monitor screen.
The unit is pressure tested to 500 m.
Specification
Materials | Sound velocities between 1000 m/s and 9995 m/s |
Measurement Range in Steel | 3 mm - 250 mm with 2.25 MHz probe 2 mm - 150 mm with 3.5 MHz probe 1 mm - 50 mm with 5 MHz probe |
Accuracy | ±0.1 mm (±0.004”) or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration procedure |
Resolution | 0.05 mm |
Probes | Single crystal soft-faced compression 13 mm - 2.25, 3.5 or 5 MHz |
Power | 7.0 - 30 V dc @ 150 mA (max) |
Display | (Not included) PC or Laptop with VGA |
Size | 160 mm x 62 mm |
Weight | 550 g |
Operating Temp | -10 °C to +50 °C |
Approvals | RINA Type Approved |
Testing | Tested to 500 m depth |
Communications | RS-422, Simplex Single Pair, 2400 Baud |
Compliance | British Standard BS EN 15317:2013 |
Environmental | RoHS, WEEE Compliant |
Kit Content
Cygnus Mini ROV gauge, probe cable with marinised probe (0.95m), sealed 4-way connector with fly lead including 9 way connector, RS-422 to RS-232 converter, test cable, CygLink data logging software, membrane couplant for the UT probe, spare membranes for the UT probe, membrane locking ring key, spare O-Rings for ROV, 15 mm test block, operation manual, carry case, silicone grease and ***optional Topside Repeater with Video Overlay facility kit.
Applications
- Oil rigs
- Wind turbines
- Ships
- FPSO underwater.
*Prices as shown on this store are indicational and subject to 21% tax,
currency changes and shipping costs. For an accurate and special price please call or e-mail our support.