GIS-320 24°
*Price may change due to echange rate.
FLIR is the exclusive global distributor of the Workswell GIS-320 Thermal by FLIR optical gas imaging payload for unmanned aerial systems, unmanned ground vehicles, and mobile platforms. Built around a FLIR cooled infrared detector, the GIS-320 visualizes methane, hydrocarbons, and VOC emissions from oil and gas production, transportation, and use. When operated from a central location, users can easily and safely detect hard to reach leaks or inspect wellheads spread out over a wide area in one pass. The GIS-320 with Thermal by FLIR technology is a valuable addition to any leak detection and repair (LDAR) program, eliminating the need for costly remediation and avoiding harm to the environment.
Detects the following gases: benzene, ethanol, ethylbenzene, heptane, hexane, isoprene, methanol, methyl ethyl ketone, MIBK, octane, pentane, 1-pentene, toluene, m-xylene, ethane, butane, methane, propane, ethylene, propylene.
GIS-320 24°
IR resolution:
320 × 240 pixels
Thermal sensitivity/NETD:
<15 mK @ +30°C (+86°F)
Field of view (FOV):
24° × 18°
Minimum focus distance:
0.3 m (1.0 ft)
Focal length:
23 mm (0.9 in)
F-number:
1.5
Focus:
Automatic motorized focus
Zoom:
1–8× continuous, digital zoom
Digital image enhancement:
Noise reduction filter, High Sensitivity Mode (HSM)
Detector type:
Focal plane array (FPA), cooled InSb
Spectral range:
3.2 – 3.4 µm
Sensor cooling:
Stirling Microcooler (FLIR MC-3)
MTBF:
Two years or 15,000 hours (whichever is greatest), for a camera running 24/7 @ +20°C (+68°F)
Detects following gases:
Benzene, ethanol, ethyl-benzene, heptane, hexane, isoprene, methanol, methyl ethyl ketone, MIBK, octane, pentane, 1-pentene, toluene, m-xylene, ethane, butane, methane, propane, ethylene, propylene
Full frame rate:
60 Hz
Automatic image adjustment:
Continuous/manual; linear or histogram based
Manual image adjustment:
Level/span
Image modes:
IR image, High Sensitivity Mode (HSM)
Temperature range:
–20°C to +350°C (–4°F to +662°F)
Non-radiometric IR video streaming:
Image: 16-bit 320 × 240 pixels at 30 Hz
Video: 640 × 480 pixels at 30 Hz
Interfaces:
HDMI
Ethernet
10-pin digital port
USB:
Control and image
USB, standard:
2.0 High Speed
USB, connector type:
USB standard
USB, video streaming:
640 × 480 pixels at 30 Hz (using USB video class)
USB, image streaming:
16-bit 320 × 240 at 30 Hz (using USB video class)
Ethernet:
Future connectivity
Digital output:
10-pin digital port:
S.BUS, CAN bus (compatible with DJI M600 and A3 controllers), MavLink External GPS connectivity and external trigger
DC operation:
9 – 36 VDC, Coaxial 2 × 6.4 mm, outer shell - GND
Power:
18 W
Start-up time:
Typically 7 min. @ 25°C (77°F)
Operating temperature range:
–15°C to 50°C (5°F to 122°F)
Storage temperature range:
–15°C to 70°C (5°F to 158°F)
Humidity (operating and storage):
IEC 68-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F) (2 cycles)
Directives:
EMC: 2014/30/EU
Vibration:
2 g, 30 minutes confirmed
Weight:
1.6 kg (3.5 lb)
Cameras size, incl. lens (L × W × H):
201 × 150 × 101 mm (7.9 × 5.9 × 4.0 in)
Packaging, type:
Hard case
Packaging, contents:
GIS-320 camera head with lens
Lens cap
USB Flash drive 32 GB
HDMI cable
10-pin standard cable
Power supply cable
2x Software license Thermolab
My.Workswell card
Hard transport case
Packaging, weight:
4.4 kg (9.7 lb)
Packaging, size:
340 × 320 × 150 mm (13 × 12 × 6 in)
EAN-13:
7332558027967
UPC-12:
845188024222
Country of origin:
Czech Republic
For orders under € 450 we charge € 25 order costs.
Prices shown on this website are before taxes, currency changes and shipping costs.
For an accurate price please contact our sales team at info@comm-co.com
Shipping costs may vary after receiving the package from the manufacturer. And a recalculation takes place.